background image

- 25 -

11  YOUR GUARANTEE

 

Congratulations on purchasing a Stuart Turner Mainsboost Plus system. 

 

We are confident this product will give you many years of trouble free service as all    

 

our products are manufactured to the very highest standard. 

 

The Mainsboost Plus system consists of three key assemblies, the pump and  

 

 

upstream line-in kit are covered by the three year guarantee and the Mainsboost  

 

 

vessel has a five year guarantee.  

 

Within the guarantee period we will repair, free of charge, any defects in the  

 

Mainsboost Plus resulting from faults in material or workmanship, repairing or  

 

 

exchanging the part affected or whole unit as we may reasonably decide. 

 

Not covered by this guarantee: Damage arising from incorrect installation, improper    

 

use, unauthorised repair, normal wear and tear and defects which have a negligible    

 

effect on the value or operation of the unit. 

 

Reasonable evidence must be supplied that the product has been purchased within    

 

the guarantee term prior to the date of claim (such as proof of purchase or the  

 

 

product serial number). 

 

This guarantee is in addition to your statutory rights as a consumer.  If you are in any  

 

doubt as to these rights, please contact your local Trading Standards Department. 

 

In the event of a claim please telephone 

‘PumpAssist’

 customer support.

+44 (0) 800 31 969 80

 

You should obtain appropriate insurance cover for any loss or damage which is not    

 

covered by Stuart Turner Ltd in this provision.

 

Please record here for your records.

TYPE NO.

SERIAL NO.

DATE PURCHASED

Summary of Contents for Mainsboost Plus





























Reviews: