The process is cyclical. By pressing the button the display is
reset. By pressing the button offset stop 2 is confirmed and the next
parameter - time move motor - is set. The value determines the time of
rotation of the container in order to stick the label better. It is set by the user.
Entering is done by changing the indicated number by pressing the
button Moving to the next digit is done by pressing the button
The process is cyclical. By pressing the button the display is reset.
By pressing the button the set time is confirmed and switched to
operating mode - fig.1.
If you stay in a parameter menu window for more than 60 seconds
without operation / pressing any key, the machine switches to operating
mode - fig.1. Changes made so far are recorded.
-
7
-
V.
2
.0
0
STS808
TIME MOVE MOTOR
------------------------------
02.00
^
------------------------------
[00
.00
...
60.00
s]
fig
.16
C
M
C
M
phone: (+359) 66 801 536 fax: (+359) 801 547
www.stselectronics.
eu
