Operating Manual
5
Stops / interrupts the data transfer. All the data read out until this button was pressed will be
transferred.
6
This function allows to delete ALL the recorded data in the datalogger. To do this, a password must be
entered (see also chapter 3.3). As long as the program hasn’t been closed and re-started, you will be
able to delete the data in the datalogger without entering the password again.
ATTENTION: Read out and save all important data before deleting the datalogger memory.
All data will be erased and cannot be restored!
DEB004H
Seite 34 von 68
14. März 2006
