Operation and maintenance manual
Product code: CTS01 (Ex)
Product description: Gas Cylinder Trolley
BESPOKE HANDLING EQUIPMENT LTD
Technical Support Line: +44 (0)1736 851050
Securing the Cylinder
1.
Ensure that the cylinder you intend to load into the unit is of correct size to fit
the trolley; 150-240mm in diameter.
2.
Wheel the trolley towards the cylinder in the vertical orientation.
3.
Tilt the trolley forward and use the small front wheels to slide the footplate
under the cylinder.
Vertical Orientation Pivot the trolley using axle
4.
Place your foot on the axle to pivot the trolley and cylinder until the trolley is
resting on its four wheels.
5.
Hook the safety chain around the cylinder.
6.
The cylinder is now ready for transport.
Connect safety chain Ready for transport
Placing the Cylinder Back on the Floor
1.
Remove the safety chain
2.
Place your foot on the axle to pivot the trolley and cylinder until the trolley is
resting on its footplate.
3.
Using one hand on the trolley remove the cylinder by sliding off the footplate.