Operation and maintenance manual
Product code: CTS01 (Ex)
Product description: Gas Cylinder Trolley
BESPOKE HANDLING EQUIPMENT LTD
Technical Support Line: +44 (0)1736 851050
The STS Gas Cylinder Trolley is designed for transporting Cylinders. The trolley
is designed to transport gas cylinders that are 150-240mm in diameter. The Safe
Working load for this unit is 150kg.
Do not use the unit unless you have read and fully understood the
operation and maintenance manual.
This equipment is designed for use on level ground.
Only handle cylinders that are in a good condition.
When not in use the equipment should be parked in a safe location.
This product is to be used by one operator at a time and they must be
behind the unit at all times.
Do not allow other personnel to be in front of the unit when in use.
The safe working load (SWL)/rated capacity should not be exceeded in
The equipment should be inspected at regular intervals, decided by the
operator’s company, for signs of damage or defects.
The unit must be inspected at least annually or after any unusual event by
Ensure damaged or missing safety notices are replaced; these are
available from STS.
10.The manual forces relating to the use of this equipment are relatively low;
any doubts in this should be reported to STS.
11.If any operator is in any doubt of the correct suitability of the equipment
or has any problem understanding the instruction manual then they
should contact STS for technical support.
12.Installation of third-party equipment which affects the performance of the
equipment requires the written permission of the manufacturer.
13.Upon delivery equipment should be inspected for transit damage. Any
damage should be reported to STS and the equipment should be
14.If the unit supplied is the ATEX model, ensure earthing chains are securely
fitted and are in contact with the ground at all times; also wheels should
be kept clean and free from debris.
15.The manufacturer shall not be held liable in case of faults or accidents due
to negligence, incapacity, installation by unqualified personnel or improper