MultiSwitch Plus
- Extended Control
pg 7
This mode allows you to connect up to three
supported pedals
1
for independent,
dedicated footswitch functions.
Tap, Favorite, Boost & Speed Mode
Release the footswitch. The LEDs on MultiSwitch
Plus will all be lit. Press the footswitches to
assign each switch and jack pair to control Tap
(
GREEN
LED) or FAV/Boost/Speed (
RED
LED).
Enter Tap, Favorite, Boost & Speed Mode by
holding down the
B
footswitch while connecting
the TRS cable to MultiSwitch Plus. The
B
LED
will flash
RED
to confirm the selection and all
LEDs will illuminate.
Connect the included TRS cable to the
EXP
or
FAV jack of the pedal you wish to control.
Press and hold the
B
footswitch to exit
configuration mode.
3
2
1
4
Tap, Boost,
Fav or Speed
Footswitch
A
Output Signal
Footswitch
B
Output Signal
Footswitch
C
Output Signal
Check the
Appendix
for instructions on
how to configure the connected pedal for
use in this mode.
5
1
Check the
Compatibility Chart on pg.15
for
details and a list of compatible pedals.
A
B
C
+
EXP
