pg 25
Lex
- rotary
STEP 2 – SET MIDI CHANNEL
(CONT�)
4
Press
either
footswitch to exit and store your MIDI Channel setting
and begin using Lex�
NOTE: A simple way to check that communication is working is to send CC
#102 with a value of 127 when the
ON
footswitch is off� This will enable the
ON
footswitch if MIDI is properly connected and configured�
NOTE: If you are only sending data to Lex using the Strymon MIDI EXP Cable,
the MIDI OUT mode must be set to
OFF
� (See
for details on con-
figuring the MIDI OUT mode�)
NOTE: MIDI Channel assignment is not saved per Favorite setting or MIDI
preset�