manualshive.com logo in svg

Strymon Lex-rotary, User Manual, Page: 26 / 41

Share
Download
Strymon Lex-rotary User Manual Download Page 26

pg 26

Lex

 

- rotary

Configuring Lex to Use MIDI

 (cont�)

STEP 3 – SET MIDI OUT MODE

1 

Press and hold the 

SLOW/FAST 

footswitch while connecting power 

to the pedal� Once both LEDs flash, release the footswitch�

2 

Turn the 

HORN LEVEL

 knob to select what kind of MIDI data is sent 

from Lex to other MIDI devices� Both LEDs will flash momentarily to 
indicate status�
• 

OFF:

 

RED

 (default) - No MIDI messages are sent out of Lex� 

• 

THRU:

 

BLUE

 - Incoming MIDI messages are sent to the MIDI Out 

without any additional MIDI messages generated by Lex� 

• 

SEND CC PC OTHER: WHITE

 - MIDI CC, PC, and SysEx messages 

generated by Lex are all sent to the MIDI Out�

• 

SEND CC OTHER:

 

GREEN

 - MIDI CC and SysEx messages gener-

ated by Lex are sent to the MIDI Out�

• 

SEND PC OTHER:

 

PURPLE

 - MIDI PC and SysEx messages gener-

ated by Lex are sent to the MIDI Out�

• 

SEND OTHER:

 

AMBER

 - SysEx messages generated by Lex are 

sent to the MIDI Out�

3 

Press either footswitch to store the MIDI OUT mode and exit�

Summary of Contents for Lex-rotary










































Reviews:

No comments