C
CA
AU
UT
TIIO
ON
N
•
Always make sure that you wipe the product with clean water. Dry each product after cleaning. Some cleaning agents
are corrosive in nature and may cause damage to the product. Failure to follow these cleaning instructions may void
your warranty.
•
Always dry the mattress cover before you store, add linens, or place a patient on the surface. A dry product helps to
prevent impaired product performance.
•
Do not overexpose the mattress cover to high concentrations of disinfectant solutions as they may degrade the mattress
cover.
•
Do not allow liquid to seep into the zipper area or watershed cover barrier when you clean the mattress bottom. Fluids
allowed to come in contact with the zipper may leak into the mattress.
•
Do not use cleaning agents and disinfectants with aggressive chemicals as they will reduce the expected life of the
mattress cover.
•
Failure to follow the manufacturing cleaning instructions and Stryker operational instructions may affect useful life of the
mattress.
Recommended disinfectants:
•
Quaternaries without glycol ethers - 2100 ppm active
•
Chlorinated bleach - 1000 ppm active
•
70% Isopropyl alcohol (700,000 ppm)
Always follow hospital protocols for cleaning and disinfecting.
To disinfect the mattress cover:
1. Clean and dry the mattress cover before you apply disinfectants.
2. Apply recommended disinfectant solution with pre-soaked wipes or damp cloth. Do not soak the mattress.
N
No
otte
e -- Make sure that you follow the disinfectant manufacturer’s instructions for appropriate contact time and rinse
requirements.
3. Wipe the mattress cover with a clean, dry cloth to remove any excess liquid or disinfectant.
4. Allow the mattress cover to dry.
KK-6300-en Rev 03
33
EN
Summary of Contents for ST1 Series
Page 2: ......
Page 41: ......
Page 42: ...Stryker Medical 3800 E Centre Avenue Portage MI 49002 USA KK 6300 en Rev 03 WCR AA 4 2021 04 ...