Stryker SPY PHI HH9000, Operator'S Manual

Page: 87 / 112

SPY Portable Handheld Imaging System
Operator’s Manual
81
WARNING: Do not use the SPY-PHI imager if any part of the system is damaged or does
not function properly. Failure to follow this warning may lead to injury.
The SPY-PHI System contains no user-serviceable parts. Do not attempt to open
imaging system components. Refer all servicing to a qualified NOVADAQ service
representative.
As the system enters Standby mode, the connected imager initializes. If a
communication error is detected , the camera-failed error icon will display
and there will be no illumination (see Figure 42).
If this error occurs:
1. Power off the VPI.
2. Disconnect and reconnect the SPY-PHI imager, and then power on the VPI
again to clear the error.
3. If the SPY-PHI imager fails a second time, turn the VPI power off and contact
a qualified NOVADAQ service representative.
Figure 42: Camera-failed icon