Stryker Renaissance 1066 Maintenance Manual Download Page 5

Page: 5 / 75

Preventative Maintenance

CLEANING

Hand wash all surfaces of the bed with warm water and mild detergent. Dry thoroughly.

Clean Velcro AFTER EACH USE. Saturate Velcro with disinfectant and allow disinfectant to evaporate.
(Appropriate disinfectant for nylon Velcro should be determined by the hospital.)

BIANNUAL CHECKLIST

All fasteners and knobs secure (reference all assembly prints)

Siderails move and latch properly (page 5)

All casters lock with brake pedal engaged (page 14)

Steer function working properly

All casters secure and swivel properly

Body restraints working properly

I.V. pole intact and operating properly (page 66–68)

Oxygen bottle holder intact and operating properly (page 33, 37 or 69)

Fowler operates and latches properly

Knee Gatch operates properly (page 53)

Trendelenberg/Reverse Trendelenberg operating properly

No rips or cracks in mattress cover

Transfer boards intact and operating properly (page 5)

Arm board support levers intact and operating properly (page 48)

Ground chain intact

No leaks at hydraulic connections

Hydraulic jacks holding properly (page 9)

Hydraulic drop rate set properly (page 11)

Hydraulic oil level sufficient (page 10)

Lubricate where required, including the brake adjuster assembly and brake cam (page 14)

Serial No.______________

______________

Completed By:_________________________________ Date:_____________

Summary of Contents for Renaissance 1066












































































Search results

Summary of Contents for Renaissance 1066

Reviews:

Related manuals for Renaissance 1066

Brands by name

Popular brands

Stryker Renaissance 1066, Maintenance Manual

Search results

Summary of Contents for Renaissance 1066

Reviews:

Related manuals for Renaissance 1066

Brands by name

Popular brands