manualshive.com logo in svg

Stryker Gynnie OB-GYN 1061, Maintenance Manual, Page: 13 / 87

Share
Download
Stryker Gynnie OB-GYN 1061 Maintenance Manual Download Page 13

Service Information

12

JACK ASSEMBLY TORQUE SPECIFICATION

Jack Assembly with Threads Oiled

1.

Jack Cap Assembly to Jack Actuator Cylinder

75 to 85 Foot Pounds

2.

Jack Actuator Cylinder to Jack Base Assembly

55 to 65 Foot Pounds

Jack Base Assembly with Threads Oiled

1.

Jack Pump Cylinder to Jack Base Machined

45 to 55 Foot Pounds

2.

Jack Pin Housing to Jack Base Machined

35 to 45 Foot Pounds

3.

Jack Base Plugs to Jack Base Machined

8 to 12 Foot Pounds

4.

Jack Valve Plug to Jack Base Machined

8 to 12 Foot Pounds

5.

Flow Control Valve to Jack Base Machined

16 to 20 Foot Pounds

REMOVING EXCESS AIR (VACUUM) FROM THE HYDRAULIC SYSTEM

Procedure:

1.

Verify all hydraulic linkages are secure and operating properly (see the pedal linkage adjustment proce-
dure on 

page 9

).

2.

Using the  pump pedal, actuate system several times.  This will force the air through the system and the
jack should now pump up.

Return to Table of Contents

Back to Table of Contents

Summary of Contents for Gynnie OB-GYN 1061
























































































Reviews:

No comments