Stryker CUB FL19H, Maintenance Manual

Page: 23 / 152

B Brra akke e a ad djju ussttm me en ntt,, h hyyd drra au ulliicc b ba asse e
T To oo ollss rre eq qu uiirre ed d::
• 3/4” socket
• 3/4” combination wrench
• (2) Bungee cords (or equivalent)
P Prro occe ed du urre e::
1. Raise the litter and the rails to the highest position.
2. Lift the base hood.
3. Separate the V Ve ellccrro o® fasteners that secure the base hood to the base.
4. Using bungee cords, support the base hood.
5. Using a 3/4” combination wrench and 3/4” socket, loosen the jam nut (A) (Figure 12).
6. Using a 3/4” socket, screw in the locknut (B) and test the brakes (Figure 12). Repeat until a proper brake adjustment is
found.
7. Using a 3/4” combination wrench and 3/4” socket, tighten the jam nut (A) (Figure 12).
A
B
F Fiig gu urre e 1 12 2 –– B Brra akke e a ad djju ussttm me en ntt
8. Remove the bungee cords and replace the base hood.
9. Verify proper operation before you return the product to service.
H Hyyd drra au ulliicc jja acckk rre ep plla acce em me en ntt,, h hyyd drra au ulliicc b ba asse e
T To oo ollss rre eq qu uiirre ed d::
• 1/2” socket
1900-009-002 Rev AA.6 21 EN