Chapter 1
Cub Operations Manual
8
1.6 STRETCHER CLEANING AND MATTRESS CARE
Cleaning Stretchers
Hand wash all surfaces of the stretcher with a soft cloth moistened with a solution of lukewarm
water and a mild detergent.
Wipe the stretcher clean and dry thoroughly to avoid build up of cleaning solution.
Do not use harsh cleaners, solvents or detergents. Do not steam clean, hose off or
ultrasonically clean the stretcher.
Germicidal disinfectant, used as directed, and/or chlorine bleach products are not considered
mild detergents. These products are corrosive in nature and may cause damage to your
stretcher if used improperly. If these types of products are used, ensure the stretchers is rinsed
with clean water and thoroughly dried following cleaning. Failure to properly rinse and dry the
stretchers will leave a corrosive residue on the surface of the stretcher, possibly causing
premature corrosion of critical components. Failure to follow the above directions when using
these types of cleaners may void this product warranty.
Mattress Care
Failure to properly clean the mattress, or dispose of it if defective, may increase the risk of
exposure to pathogenic substances and may cause injury to the patient and/or user.
Inspection
Implement local policies to address regular care, maintenance, and cleaning of mattress and
cover. The cover cleaning and sterilization procedures can be found below and/or on the
mattress label.
Inspect mattress cover surface (also zip fasteners and cover inner surface if mattresses have
zip fasteners) regularly for signs of damage. If the mattress cover is stained, soiled, or torn,
remove the mattress from service.
Cleaning and Sterilization
Stains: Wash with lukewarm water using a mild detergent. Rinse with water and let dry. For
tough stains, use chlorine bleach diluted with ten parts of water.
C
C
A
A
U
U
T
T
I
I
O
O
N
N
W
W
A
A
R
R
N
N
I
I
N
N
G
G
Summary of Contents for Bertec CUB FL19
Page 2: ......