Stryker Bertec CUB FL19, Operation Manual, Page: 16 / 19

Chapter 2 Cub Operations Manual
16
2.10 OPERATING THE IV CADDY (OPTIONAL)
The IVCaddy enables an IV pole to be transported when the stretcher is moved. Always ensure
the IV Caddy is secured tightly on the IV pole before transporting to avoid damaging the IV pole
or causing injury to the patient or user.
1. Lift the IV Caddy from the storage clip.
2. Pivot the IV Caddy to the desired position.
3. Turn knob (A) counterclockwise to loosen
the pole clamp (C).
4. Pivot the knob away from the clamp (B). The
clamp (C) may then be opened.
5. Place the IV pole into the clamp (B). Close
the clamp (C) around the IV pole and pivot
the knob (A) back into position.
6. Turn the knob clockwise to tighten it. The IV
pole is now ready to move with the
stretcher/bed.
7. To remove the IV pole from the IV Caddy,
turn knob (A) counterclockwise to loosen the
pole clamp.
8. Pivot the knob away from the clamp (B),
open the clamp and remove the IV pole from
the IV Caddy.
9. Store the IV Caddy.
Always store the IV Caddy when not in use to avoid damaging it when the stretcher is moved.
2.11 O
2
BOTTLE CLAMP USAGE (OPTIONAL)
An optional O
2
bottle clamp (A) may be installed on the base hood to secure the O
2
bottle in the
slot on the base.
Slide the O
2
bottle into the slot bottom first.
C
C
A
A
U
U
T
T
I
I
O
O
N
N
W
W
A
A
R
R
N
N
I
I
N
N
G
G
Figure 2.10
A
Figure 2.11