6
Instructions (cont’d)
Battery Pack Installation
NOTES:
• The Sagittal Saw is designed to accept REF 4115,
REF 4116, or REF 4126 batteries. These batteries
may be charged in the System 4 or 5 Battery Charger
configured with Charger Module REF 4110-415, REF
4110-416, or REF 4110-426 respectively. The REF
4115 battery may also be charged in the System
2000 Charger with Battery Adaptor (REF 4110-115).
• Refer to the instructions supplied with the battery
charger and/or battery for charging details and
specifications.
1. Slide a fully charged battery pack firmly into the
handpiece until the battery latch snaps, indicating the
pack is secure (see figure 3).
Figure 3 Battery Pack Installation
2. Test the operation of the handpiece by rotating the
trigger switch to either the STD or FAST position and
squeezing the trigger.
3. Set the trigger switch to the SAFE position until you
are ready to use the handpiece.
Saw Operation
NOTE:
The handpiece has a variable speed motor that
is controlled by slight pressure variations on the trigger.
CAUTION:
When operating the saw, let the blade do the cutting.
Applying too much pressure will bend the blade and
reduce the cutting quality.
Battery Pack Removal
Depress the battery latch and pull the battery pack out.
Blade Removal
Depress the blade lock button and remove the blade.
Battery Latch
Summary of Contents for 4208
Page 1: ......
