Stryker 0711-001-000, Instructions For Use Manual

Page: 51 / 78

4 4..5 5..2 2.. T To o R Re em mo ovve e P Po ow we err a an nd d R Re ello occa atte e tth he e R Ro ovve err
N No otte e -- Always use the rover handle when repositioning or relocating the rover.
N No otte e -- If the rover is full or the rover will not be used for two hours, dock the rover to dispose of the collected fluid waste
in the canister.
N No otte e -- The rover is not required to be connected to facility power when not in use.
1. Push the power switch to the OFF position (Figure 38).
2. Disconnect the power cord from facility electrical power. Wrap the power cord around the cord bracket.
3. Unlock the casters of the rover. Make sure all four casters are unlocked.
F Fiig gu urre e 3 38 8 –– R Re em mo ovve e tth he e P Po ow we err
4. If the canister is full or the rover contains fluid waste and will not be used within two hours, relocate the rover to the
docker using the rover handle. See To Dock the Rover (page 54).
5. If the canister is not full and the rover will be used within two hours, relocate the rover to the desired location using the
rover handle. See To Setup the Rover (page 36).
6. Clean and disinfect the rover after every surgical procedure. See To Clean and Disinfect the Rover (page 50).
700000969828 Rev-AA 49 EN
DRAFT
NOT
FOR
SALE