EN
0702-034-700 Rev-H
2
www.stryker.com
Indications For Use
The Neptune 2 Waste Management System
is intended to be used in the operating room,
pathology, surgical centers, and doctor’s
offices to collect and dispose of surgical fluid
waste as well as collect smoke generated
from electrocautery or laser devices.
Contraindications
The Neptune 2 Waste Management System is
contraindicated against
:
▪
Connection directly to
chest tubes
.
▪
Connection to
closed wound drainage
systems
.
Contact Information
NOTE:
For additional information, especially
safety information, or in-service training,
contact your Stryker sales representative or
call the Stryker Neptune Service Center at
1-800-550-7836.
For Use With
The Stryker Fluid Suction HEPA Filter REF
0702-034-000 (filter) is for use with the
Neptune 2 Waste Management System,
specifically the rover.
Description
The filter provides high efficiency particulate
air (HEPA) filtration of the air evacuated from
the fluid collection canister(s) of the rover
before the air is vented.
Symbol Definitions
The symbols located on the equipment and/
or labeling are defined in this section or in
the
Symbol Definition Chart
. See the
Symbol
Definition Chart
supplied with the equipment.
SYMBOL
DEFINITION
GENERAL WARNING
SIGN
CONSULT
INSTRUCTIONS FOR
USE
2
1
3 4
6
5
REPLACE THIS
FILTER EVERY 6
MONTHS OR AS
INDICATED BY THE
ROVER.
DO NOT MAKE
CONTACT WITH THE
FILTER MEDIA.
User/Patient Safety
WARNINGS:
▪
Before using any system component,
or any component compatible with
this system, read and understand the
instructions. Pay particular attention to
WARNING information. Become familiar
with the system components prior to use.
Failure to comply may result in patient
and/or healthcare staff injury.
▪
Only trained and experienced healthcare
professionals should use this equipment.
▪
Upon initial receipt, inspect each
component for damage. DO NOT use any
equipment if damage is apparent. Failure
to comply may result in patient and/or
healthcare staff injury.
0000012816, Rev. H Effective Date: Mar 7, 2017 12:56:42 PM
Print Date: Mar 07, 2017 04:15:37 PM
