Stryker Medical RUGGED 6080 MX-PRO, Operation & Maintenance Manual

Page: 4 / 73

Introduction
3
INTRODUCTION
This manual is designed to assist you with the operation and maintenance of the 6080 MX–
PRO Ambulance Cot. Read it thoroughly before using the equipment or beginning any maintenance on it.
SPECIFICATIONS
Overall Length/Minimum Length/Width 80”/62”/23”
Height
!
– Position 1
Position 2
Position 3
Position 4
Position 5
Position 6
Position 7
Position 8 12”
19.5”
23.5”
26.5”
29.5”
32.0”
34.5”
37”
Backrest Articulation/Shock Position 0
_
to 75
°
/+14
_
Weight
@
84 pounds
Maximum Weight Capacity 600 pounds
Caster Diameter/Width 6”/2”
Minimum Operators Required for Loading/Unloading 2
Recommended Fastener Systems Model 6370/6374 Floor Mount Type
Model 6371/6375 Wall Mount Type
Recommended Floor Height Up to 33”
Roll–In Style Yes
Wheel Lock Optional
!
Height measured from bottom of mattress at seat section to ground level.
@
Cot is weighed without mattress and restraints.
Stryker reserves the right to change specifications without notice.
The MX–PRO is designed to conform to the Federal Specification for the Star–of–Life Ambulance KKK–A–1822–D.
WARNING / CAUTION / NOTE DEFINITION
The words WARNING, CAUTION and NOTE carry special meanings and should be carefully reviewed.
WARNING
The personal safety of the patient or user may be involved. Disregarding this information could result in injury
to the patient or user.
CAUTION
These instructions point out special procedures or precautions that must be followed to avoid damaging the
equipment.
NOTE
This provides special information to make maintenance easier or important instructions clearer.