15. The machine must be disconnected from the electrical power supply before
any service.
16. Struers equipment must only be used in connection with and as described in
the Instruction Manual supplied with the equipment.
17. If the equipment is subjected to misuse, incorrect installation, alteration,
neglect, accident or incorrect repair, Struers will accept no responsibility for
damage to the user or the equipment.
18. Dismantling of any part of the equipment, during service or repair, should
always be performed by a qualified technician (electromechanical, electronic,
mechanical, pneumatic, etc.).
2.4
Safety messages
Struers uses the following signs to indicate potential hazards.
ELECTRICAL HAZARD
This sign indicates an electrical hazard which, if not avoided, will
result in death or serious injury.
DANGER
This sign indicates a hazard with a high level of risk which, if not
avoided, will result in death or serious injury.
WARNING
This sign indicates a hazard with a medium level of risk which, if not
avoided, could result in death or serious injury.
CAUTION
This sign indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury.
CRUSHING HAZARD
This sign indicates a crushing hazard which, if not avoided, could
result in minor, moderate or serious injury.
HEAT HAZARD
This sign indicates a heat hazard which, if not avoided, can
result in minor, moderate or serious injury.
6
Cooling unit pumps
2 Safety
