11
POSITIONING, ALIGNING, LEVELING UNIT, REMOVING FRONT GRILLE
Pry Bar
Base
Frame
Leveler
Adjustable
Wrench
1. Position & Align Case Alongside Other Cases
Before adjusting levelers, make certain that the
case is in proper position and, if required,
aligned with adjoining case.
This may require the repositioning of the case
you are installing or the already positioned case.
2. Adjust Levelers
After case is in proper position, adjust case so it
is level and plumb (see illustration at right).
You may need to remove front and/or rear
Toe-Kick to access levelers.
Use adjustable wrench to adjust leveler.
Depending upon case weight it may be necessary
to use a Pry Bar to accomplish this task.
Do not use Pry Bar on Toe-Kick as it may buckle.
Do not use Pry Bar on End Panel; it may chip.
Use Pry Bar ONLY on Base Frame to avoid
damaging case.
See illustration and photos at right.
Note: Depending upon options and features
chosen, illustrations may not exactly reflect your
particular case’s features.
3. Removing Front Grille (If Necessary)
Remove screws located at underside of front
panel to access drain or refrigeration lines.
Front Grille will fall forward and can be lifted up
and away from case.
Replace Front Grille in reverse order it was
removed from case.
See illustration at lower right (may not exactly
reflect every feature or option of your case).
(3) Front Grille
Retainer Screws