15
CONDITION
TROUBLESHOOTING
Case Lights
Do Not Work
Check that light switch is in the
ON
position.
See either
MODEL SHS9251 LAYOUT: LED LIGHTS & SWITCHES
section in this
manual for light switch locations.
Check that ALL of the light plugs are properly connected to the LED light.
Plug must be inserted ALL THE WAY into the LED light orifice (with no gap).
See illustrations below.
Power may not be reaching the case.
Contact store management to have trained service provider perform troubleshooting.
Troubleshooting is to be performed by trained service providers only.
If case light still do not come on, it may need to be replaced.
Contact Structural Concepts’ Technical Service Department for replacement light
(see
TECHNICAL SERVICE
section of this manual for contact information).
To replace, disconnect plug from existing LED light. Disconnect LED light from its
brackets. Replace with new LED light. Insert plug ALL THE WAY into LED light
orifice (as illustrated below).
TROUBLESHOOTING
No Gap
Gap
--- LED Plug & Light Fixture Illustrations ---
LED Light
Plug
LED’s Bar-
