PARKING THE CRAWLER
1. Lower all Attachments to the ground.
2. Allow Right and Left Track Controls to go
"slowly" to neutral.
3. Push fully forward on Main Drive Clutch/
Brake Lever and
lock
.
4. Run Engine at half speed 2 minutes
without load.
5. Move Throttle Control to slow idle.
6. Turn Ignition Switch to
Off
.
IMPORTANT
: If Engine stops under load, remove
load. Start Engine immediately. Run 30 seconds
at half speed before adding load.
If Engine stops, you must turn key
Off
before
you can start the Engine.
In freezing weather, park on a hard surface to
avoid freezing the Tracks to the ground. If
Tracks are frozen to the ground, be careful to
avoid damage to the Tracks and drive train
when you try to move the Crawler.
CAUTION
: When you park your Crawler
on a slope, put blocks against tracks.
Do
not
park Crawler with tracks pointed downhill.
