Page 4 of 12
Intended Use
The Strongway 60 Watt Industrial LED Low Bay Light is a high-performance, heavy-industrial, LED
solution designed for unforgiving
climates and demanding areas. It’s suitable for the most rugged
areas from wet locations to high ambient conditions. Common applications include manufacturing,
machining, foundries, natatoriums, gymnasiums, cold storage, and the automotive industry.
Technical Specifications
Property
Specification
Hertz
50/60Hz
Voltage
90-264V
Driver
Input: 90-264VAC, Output: 36V
Heat Sink
Aluminum Alloy Housing
Color Temperature
5000K
Important Safety Information
⚠
WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this light. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
Do not allow persons to operate or assemble the light until they have read this manual and have
developed a thorough understanding of how it works.
Do not modify this light in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the light
was designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will
be a safer experience and do the job better at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
Industrial or commercial applications must follow OSHA requirements.
⚠
WARNING
WORK AREA SAFETY
Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.
Cluttered, wet, or dark work areas can result in injury. Using the light in confined work areas may
put you dangerously close to other cutting tools and rotating parts.
Do not use the light where there is a risk of causing a fire or an explosion; e.g., in the presence of
flammable liquids, gases, or dust. The product can create sparks, which may ignite the flammable
liquids, gases, or dust.
Keep children and bystanders away from the work area while operating the tool. Do not allow
children to handle the light.
Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your
work area. Some of these hazards may be hidden from your view and may cause personal injury
and/or property damage if contacted.
