background image

Page 5 of 15 

 

Important Safety Information 

WARNING

 

 

Read and understand all instructions. Failure to follow all instructions may result in serious injury 
or property damage. 

 

The warnings, cautions, and instructions in this manual cannot cover all possible conditions or 
situations that could occur. Exercise common sense and caution when using this jumpstarter. 
Always be aware of the environment and ensure that the jumpstarter is used in a safe and 
responsible manner.  

 

Do not allow persons to operate or assemble the jumpstarter until they have read this manual and 
have developed a thorough understanding of how it works. 

 

Do not modify this product in any way. Unauthorized modification may impair the function and/or 
safety and could affect the life of the product. There are specific applications for which the product 
was designed.  

 

Use the right jumpstarter for the job. DO NOT attempt to force small equipment to do the work of 
larger industrial equipment. There are certain applications for which this equipment was designed. 
It will be safer and do a better job at the capacity for which it was intended. DO NOT use this 
equipment for a purpose for which it was not intended. 

 

Industrial or commercial applications must follow OSHA requirements. 

 

WARNING

 

 

This jumpstarter may contain chemicals known to the State of California to cause cancer, birth 
defects or other reproductive harm. 

 

WARNING

 

WORK AREA SAFETY 

 

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit. 
Cluttered, wet, or dark work areas can result in injury. Using the jumpstarter in confined work 
areas may put you dangerously close to cutting tools and rotating parts. 

 

Do not use the jumpstarter where there is a risk of causing a fire or an explosion; e.g., in the 
presence of flammable liquids, gases, or dust. The product can create sparks, which may ignite 
the flammable liquids, gases, or dust. 

 

Keep children and bystanders away from the work area while operating the jumpstarter. Do not 
allow children to handle the jumpstarter.  

 

WARNING

 

PERSONAL SAFETY 

 

Risk of explosive gases. Working in the vicinity of a lead acid battery is dangerous. Batteries 
generate explosive gases during normal battery operation. Do not smoke, use matches, or a 
cigarette lighter while near batteries. Do not handle the battery while wearing vinyl clothing. The 
static discharge from vinyl clothing rubbing together may ignite explosive gases, causing injury 
and/or property damage. 

Summary of Contents for 500A 53013
















Reviews: