background image

Page 6 of 15 

 

product with a damaged part. 

 

Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with 
the power switch is dangerous and must be repaired by an authorized service representative 
before using. 

 

Disconnect the power/air supply from the product and place the switch in the locked or off position 
before making any adjustments, changing accessories, or storing the tool. Such preventive safety 
measures reduce the risk of starting the tool accidentally. 

 

Store the product when it is not in use. Store it in a dry, secure place out of the reach of children. 
Inspect the tool for good working condition prior to storage and before re-use. 

 

Use only accessories that are recommended by the manufacturer for use with your product. 
Accessories that may be suitable for one product may create a risk of injury when used with 
another tool. Never use an accessory that has a lower operating speed or operating pressure than 
the tool itself. 

 

Keep guards in place and in working order. Never operate the product without the guards in place. 

 

Do not leave the tool running unattended. 

Specific Operation Warnings 

WARNING

 

 

To prevent serious injury or property damage, read and understand owner’s manual before 
operating. 

 

Electric shock hazard. Do not expose the unit or the plug to water or rain. Do not use the fan near 
a water source such as a swimming pool, bathtub, or shower. 

 

Be sure the fan is properly grounded. 

 

Do not use this fan with any solid state speed control device. 

 

Only plug the unit into a power outlet with the same voltage as rated voltage of it. 

 

Rotating blade hazard. Keep hands clear to avoid serious injury. 

 

Do not operate in the presence of explosive and/or flammable fumes. 

 

Always disconnect the power before servicing and cleaning or moving the fan to a new location. 

 

Do not plug/unplug the fan into/from the electrical outlet while wet or standing in a wet or damp 
area. 

 

Never operate the fan without the guard in place. 

 

For indoor use only. Do not use outdoors. Do not place the fan in or near a window. Rain may 
create an electrical hazard. 

 

Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized 
service facility for repair before resuming operation. 

 

Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. 

 

Do not place cord under furniture or appliances. Arrange cord away from a higher traffic area and 
where it will not be tripped over. 

Summary of Contents for 20In
















Reviews: