Network environment requirements
Cable connection
4. Network cable connection
Insert the RJ45 network cable connector into the jack of the controller
panel. When the plug is inserted in place, a clicking sound can be heard
under normal circumstances.
5. Power cable connection
Insert one end of the power cable into the power socket, and the other
end into the AC mains socket.
This product only supports the cabled access to network through RJ45
interface.
It does not support the POE (Power Over Ethernet) power supply router
(switch).
The DHCP service of the router (switch) must be enabled.
After connecting the cables, turn on the power supply. The miner will start
running. The three LED blue indicators on the controller panel will be
normally ON after self-testing. Conduct the operations according to the
sequence below.
Installation configuration
Shenzhen StrongU Technology Co., Ltd.
6/13
