Strong SRT 8208 User Manual Download Page 17

channels and favourite list(s) will be deleted. The new-found channels will be 

installed in the channel list and afterwards you can create a new favourite list 

if you like. Press 

OK

 to start the scan.

Manual Search

 

 Select a particular channel to do a search on just one (known) frequency. 

Select 

Start Search

 and press 

OK

 to start the scan. The signal quality bar might 

be useful to check if the frequency is indeed in use.

Antenna Power

 

 Set  to 

On

 if you use an active antenna. When set to 

On

, 5 V will be present at 

the 

ANT IN

 connector of the receiver. Select 

Off

 for passive antennas.

FTA

 

 FTA Free to Air, Select between 

Yes

 which will only install Free-to-Air channels 

or 

No

 which will install all found channels, even if they are scrambled. Then 

select 

Auto Search

 or 

Manual Search

 to start scanning.

7.5 Language

This menu allows you to set up your language preferences.

Language

 Use 

t

 

u

 to select the language for the On Screen Display (OSD).

First Audio

 Use 

t

 

u

 to select the audio language you like to hear as first priority, if 

available.

Second Audio

 Use 

t

 

u

 to select a language that will be played when the language selected 

at 

First Audio

 isn't available.

Subtitle Language

 Use 

t

 

u

 to select the preferred subtitle language.

7.6 AV Setting

Use this menu to match your receiver to your TV set.
The following settings are available:

Video Resolution

 

 If the video quality does not appear correctly, change the setting. These 

settings match the most common settings for HDMI.

576i

 For analogue TVs (on Scart connection).

576p

 For digital SD TVs (some digital TVs do not support this mode).

720p

 For digital HD TVs (on HDMI connection).

1080i

 For digital HD TVs (on HDMI connection).

1080p

 For digital HD TVs (on HDMI connection).

Aspect Mode

 Select the aspect ratio that matches your TV. This is either a 4:3 or a 16:9 

possibility. Select in combination the preferred conversion method how to 

show a 16:9 programme on a 4:3 TV, or a 4:3 programme on a 16:9 TV. The 

options are:

16:9 Fullscreen

 

 A 4:3 programme will be show full screen on a 16:9 screen, with sideways 

stretched content.

4:3 Letterbox

 

 The full 16:9 programme will be displayed on your 4:3 TV set with black bars 

above and below the picture

4:3 Pan Scan

 

 A centre cut-out of the 16:9 programme will be displayed full-screen on your 

4:3 TV, missing content to the left and right.

4:3 Fullscreen

 

 A 16:9 programme will be compressed sideways on a 4:3 TV, to show a full 

picture without any black bars

13

English

Summary of Contents for SRT 8208

























Reviews: