Strong SRT 8208 User Manual Download Page 11

3.0 CONNECTION

3.1 Connecting to a terrestrial antenna

Fig. 6

To receive broadcast signal, your terrestrial indoor or outdoor antenna must be connected to the ANT IN 

connector on the back of the receiver. Use a properly shielded antenna cable and suitable connectors.

3.2 Connecting to TV with HDMI cable

Fig. 6

The TV set shall be connected with the receiver using a good quality HDMI 1.3 or higher cable. This 

connection gives the highest possible quality.

3.3 Connecting to TV with SCART cable

Fig. 6

The unit is also equipped with a SCART connector; alternatively, the TV set can be connected to the 

receiver using a good quality SCART cable.

3.4 Connecting to a Digital Audio Amplifier with S/PDIF

Fig. 7

By connecting your receiver to a digital amplifier or home theatre system, you can enjoy the best 

possible sound quality and multi-channel audio (depending on broadcast) up to Dolby Digital. Connect 

your Digital Audio Amplifier or home theatre system with a suitable cinch cable to the S/PDIF connector 

on the back of the receiver.

3.5 Connecting to a Digital Audio Amplifier and TV using HDMI

Fig. 7

By connecting your receiver to the latest digital amplifiers or home theatre systems with HDMI 

connections, you will enjoy the best possible sound quality and multi-channel audio (depending 

on broadcast), up to Dolby Digital Plus. Connect the HDMI output of the receiver to an input of your 

amplifier, and then connect the HDMI output of the amplifier to your TV set. Select the correct input on 

your amplifier to watch and listen to programmes.

3.6 Connecting a USB storage device

Fig. 8

NOTE:

 

 We recommend the use of a hard disk drive USB 2.0 for recording and play 

back of TV events.

For proper functioning of Timeshift and recording functions, a fast USB device (such as a hard disk drive) 

is needed. Interrupted playback or a distorted picture during playback or Timeshift are indications for a 

low device speed. STRONG cannot guarantee proper functioning of recording and or Timeshift functions 

with all USB devices.

7

English

Summary of Contents for SRT 8208

























Reviews: