PART 1 • English
6
3.0 CONNECTIONS
3.1 Connecting to TV & VCR
Basic connection with a Scart cable (Fig. 3)
1. Connect the satellite signal from the LNB to the LNB IN connector.
2. Connect the TV SCART connector at the back of the receiver to the SCART IN connector
on your TV set.
Advanced connection of the receiver to the TV set and VCR (Fig. 4)
1. Connect the satellite signal from the LNB to the LNB IN connector.
2. Connect the TV SCART connector at the back of the receiver to the SCART-in connector
on your TV set.
3. Connect the VCR SCART connector at the back of the receiver to the SCART-in
connector on your VCR.
Optional:
n
Connect a UHF coaxial lead or cable antenna lead to the ANT IN input connector at the
back of the receiver.
n
Connect a coaxial cable to the TO TV connector at the back of the receiver. Connect the
other end of this coaxial cable to the ANT IN connector of your VCR.
n
Connect the TV OUT connector of your VCR to the ANT IN connector of your TV set with a
coaxial cable.
3.2 Connecting to Digital Audio Amplifier
The Digital Audio Amplifier is connected with the receiver from the S/PDIF connector. (FIGURE 5)
3.3 Connecting to Satellite Dish
Connecting a fixed satellite dish to your receiver (Fig. 6)
First choose a satellite you want to receive your signals from, and have your dealer aim your dish at
the requested satellite. Connect a coax cable to your LNB and the other end directly to the LNB IN
connector of your receiver.
Connecting multiple fixed dishes to your receiver using a DiSEqC 1.0 switch (Fig. 7)
If you want to watch programs from more than one satellite (For example from Astra and from
HotBird) it is advisable to use fixed dishes and a DiSEqC 1.0 switch. Have your Dealer aim the
dishes at the requested satellites and connect the LNB’s with coax cables to the IN connectors
of the DiSEqC 1.0 switch. Connect the OUT connector of the DiSEqC 1.0 switch to the LNB IN
connector at the back of your receiver.
Connecting a dish on a motorized positioner to your receiver (Fig. 8)
Another possibility for watching programs from multiple satellites is by mounting a dish to a
motorized DiSEqC 1.2 positioner. Have your dealer mount the dish to the positioner, set the correct
angle of the elevation and let him set the center point for your positioner. Connect the LNB with
a coax cable to the LNB IN connector of the positioner, and connect the OUT connector of the
positioner to the LNB IN connector at the back of your receiver.
