Strong SRT 6006, User Manual

Page: 15 / 26

PART 1 • English
11
English
Delete satellite
If you want to delete a satellite, press the YELLOW key. Then warning message will appear. Select
OK and press the OK key to confirm.
5.2.2 Auto Scan
Press the GREEN key to set the scan mode to Free or Free+Scrambled . If mode is Free then only “Free
to Air” channels will be added to the channel list. If mode is Free+Scrambled then all channels from
selected satellite will be added to the channel list.
Press the
YELLOW Key to set the Blind Scan to ON or OFF . Blind scan function is useful to scan
new added satellite, but scan may take long time.
Press the
bLUE
Key to set the scan type to NIT OFF or NIT ON while Blind Scan is set to OFF and
to Quick Search or Detail Search while Blind Scan is set to ON .
When the set-up is completed, press the RED key to start the scan, shown as below.
5.2.3 Manual Scan
In this menu, you can scan single transponder, add a new transponder, edit the transponder or
delete the transponder.
You can switch between satellites with the
RED button,
Scan transponder:
Use UP/DOWN buttons to select the transponder. Press OK button to start scan.
Add Transponder:
In this menu, you can add a new transponder to the system. Press the GREEN button, the Add
Transponder sub-menu will appear.
Frequency : input the frequency of the new transponder.
Symbol Rate : input the symbol rate of the new transponder.
Polarity : Select the Polarity of the new transponder.
Edit Transponder :
In this menu, you can edit a transponder in the system. Press the YELLOW button, the Edit
Transponder sub-menu will appear. This menu is similar to Add Transponder menu.
Delete Transponder
Press the bLUE button to delete a transponder. You will need to confirm operation.
Press LEFT/RIGHT to select OK , press the OK button to confirm.
5.3 System setting
In this menu, you configure the system, such as Language Setting, OSD style, Parental Control, TV
Settings and Time Setting.