Assure the correct A/V Mode has been selected in the
Menu
by Pushing Menu Button on the remote Control;
Main Menu Banner will appear; Select
System
Parameters
and then scroll down to A/V Mode
and
select the preferred AV mode
: i.e. RGB or S-Video
(Y/C) or CVBS (Composite)
Once preferred A/V mode has been selected, Push
EXIT
button
11
on the remote control to return to
normal viewing broadcast.
5
Dolby Digital Audio
If you have a Dolby Digital Decoder Amplifier, you can
connect to the amplifier by
Optical Cable or Coaxial
Cable
(purchased separately). These connections will
provide for Dolby Digital Output when broadcast.
Connector
1
is the Optical audio output.
Connector
3
is the Digital audio output.
To ‘Enable’ Dolby digital to be heard when transmitted
within the broadcast stream, you will need to select
Dolby Digital in the System Parameters.
Push the
Audio
Button
5
.
Scroll down via button 13 and select
Dig. Output
IMPORTANT: If broadcaster is not transmitting in
Dolby digital at that time, you will not be able to
select topic of DIG. Output
All of the above connection/s and procedure
completes the Connections Installation, however,
there are other connections that can be made
(Not Essential), explained as below.
The Correct A/V Mode
