For connection of the SRT 5390 there are number of
alternatives depending what is your preference and
the connection types on your TV.
Please connect by either of the following methods
A. B. C. (D
. is mandatory for antenna connection)
Refer to
Page 8
of the
Instruction Manual
for the
Connector Reference
Numbers listed below.
2
Connections
If your TV includes a 4 Pin Mini Din S-Video
connector
,
you may choose to connect in this way.
Although S-Video is available through the Scart, there is
an additional S-Video connector (connector 2) on the
rear panel and unit can be connected to the TV this way.
(You will need to purchase S-Video Lead separately)
If you choose to connect in this way, once unit is
POWERED (Refer
Power On
below), go into the SRT
5390
Menu button 10
and select
System Parameters
and select S-Video in the
AV Mode
.
Important:
Using this separate S-Video (Y/C) for your
Video connection, you will need to make connections
for
Audio.
For Audio this can be done by using the
supplied
RCA cable
by connecting to Connector
9
for Left
Audio (RCA White) and Connector
10
for Right Audio
(RCA Red), and then connect to appropriate RCA
audio connectors of your TV.
These Left (white) & Right (Red) RCA Audio
connections will provide MPEGA-2 Stereo.
If you require Dolby Digital Audio Output (through
you’re Dolby Digital Decoder Amplifier) please refer to
Note:
DOLBY DIGITAL AUDIO
below)
Connector 2
S-VIDEO (Y/C) S-video jack S-video output
B. Separate S-Video (Y/C)
Connector
A. SCART Connection for:
RGB or S-Video or CVBS
If your TV includes a 21 Pin Scart Connector, you
may choose to connect in this way and select your
choice of RGB, S-Video (Y/C) or CVBS (Composite).
(You will need to Purchase Scart Lead separately)
Through the Scart, the Factory Default setting in the
Menu is listed as RGB.
If you decide to operate as CVBS (Composite), you
do not need to change to CVBS mode in the A/V
mode (as explained below), as the unit will
automatically default to CVBS mode.
However, if you choose to have S-Video (Y/C) from
the
Scart
, once unit is POWERED (Refer
Power On
below), please go into the Main Menu of the SRT
5390 and select
System Parameters
, then Scroll
down to AV Mode and via the remote control left and
right centre buttons select the preferred AV Mode.
(Connector 4
)
TV SCART
SCART 21 pin Scart output to TV:
3 video signals to choose from:
RGB
S-Video (Y/C)
CVBS (composite)
Also, by using Scart Output,
Audio MPEG-2 is included
If you require Dolby Digital Audio Output (through
your Dolby Digital Decoder Am0plifer, please refer to
Note
DOLBY DIGITAL AUDIO
.
