13
PART 1 • English
En
gl
is
h
Problem
Possible cause
What to do
Scrambled channel
message
Channel is scrambled
Select alternative channel
No response
to remote
control
Receiver off
Remote not aimed correctly
Front panel obstructed
Remote batteries exhausted
Plug in and turn on plug
Aim remote at front panel
Check for obstructions
Replace remote batteries
Forgotten PIN code
Contact local Service Hotline or
send email to our Support via
www.strong.tv
After moving the
receiver to another
room \area you
are no longer
able to receive
digital reception
Antenna signals are too weak
Press 3 x
Info
button on remote
for call signal bars and adjust
antenna for (maximum) reception
or rescan channels
The receiver switches
off automatically.
Auto Standby function enabled.
Disable auto standby. See section
5.3.8 for details.
8.0 sPECIfICATIons
Demodulator:
Demodulator:
COFDM; 16 QAM/64 QAM
Transmission mode:
2 K - 8 K
video Decoder:
Profile level:
MPEG-2 MP@ML
Video resolution:
720 x 576 pixels (PAL), 720 x 480 (NTSC)
Decoding & Video Out:
PAL & NTSC
Aspect ratio:
4:3, 16:9
Audio Decoder:
MPEG MusiCam Layer 2
Sampling rate:
32, 44.1, 48 kHz
Audio mode:
Stereo, Joint Stereo, Dual Mono, Mono
Tuner:
Front End:
DVB-T, UHF & VHF Tuner
Input frequency range:
174 ~ 230 MHz (VHF) and 470 ~ 862 MHz (UHF)
Loop through frequency range:
47 ~ 862 MHz
Input signal level:
-82 ~ -20 dBm
