6
7
English
Controls/Functions
4.1 Front Panel
4.2 Rear Panel
Standby/Power on Indications Lamp :
Flashes red light in ‘Standby’ mode
and shows no light in ‘Power ON’ mode.
Indication Light :
Flashes when a key on the Remote Control Unit (RCU) is
pressed.
Power :
Switches the receiver between ‘Standby’ and ‘Power ON’ modes.
- CH.
Ɗ
/
ƌ
:
To switch channels or change the cursor position on the
application screen.
USB
: To connect USB devices such as Memory stick or external Hard Disk
Drive.
Smart Card Reader(Option)
: Insert smart card for encrypted channel access.
7
6
5
4
3
2
1
1
5
6
7
3
4
2
13
1
3
6
9
12
14
2
5
8
11
No. Name
Connector
Function
1
LNB INPUT
IEC 169-24 FEMALE
IF input from LNB to digital tuner
2
LOOP OUT
IEC 169-24 FEMALE
IF loop-through output from digital tuner
3
VIDEO
RCA cinch
Composite video output
4
AUDIO L
RCA cinch
Left audio output
5
AUDIO R
RCA cinch
Right audio output
6
S/PDIF
RCA cinch
Digital audio output
7
AUDIO L
RCA cinch
Left audio output
8
AUDIO R
RCA cinch
Right audio output
9
Y
RCA cinch
Component video output (Y)
10 Pb
RCA cinch
Component video output (Pb)
11 Pr
RCA cinch
Component video output (Pr)
12 RS-232C
DB-9
Low speed serial port
13 RF OUT UHF 21-69
IEC 169-2 MALE
Output to TV
14 TV ANT IN
IEC 169-2 FEMALE
Input from terrestrial antenna
4
7
10
