6
7
Controls/Functions
4.1 Front Panel
4.2 Rear Panel
Standby/Power on Indications Lamp :
Flashes red light in ‘Standby’ mode and
shows no light in ‘Power ON’ mode.
Indication Light :
Flashes when a key on the Remote Control Unit (RCU) is pressed.
Power :
Switches the receiver between ‘Standby’ and ‘Power ON’ modes.
- CH.
/
:
To switch channels or change the cursor position on the
application screen.
5
4
3
2
1
3
5
1
2
4
11
1
3
5
7
8
10
12
2
4
6
9
No. Name
Connector
Function
1 RF OUT UHF
21-69 IEC 169-2 male
Output to TV
2 TV ANT IN
IEC 169-2 female
Input from terrestrial antenna
3 AUDIO L
RCA cinch
Left audio output
4 AUDIO R
RCA cinch
Right audio output
5 VIDEO
RCA cinch
Composite video output
6 S/PDIF
RCA cinch
Digital audio output
7 Y
RCA cinch
Component video output(Y)
8 Pb
RCA cinch
Component video output(Pb)
9 Pr
RCA cinch
Component video output(Pr)
10 RS-232C
DB-9
Low speed serial port
11 LNB INPUT
IEC 169-24 female
IF input from LNB to digital tuner
12 LOOP OUT
IEC 169-24 female
IF loop-through output from digital tuner
