Press
OK
to adjust. After fi nish your adjustment, press
OK
to save and return to the previous menu.
Below items dep end if they are available of select input source. Use
INPUT
to select another source.
5.4.1 Auto Tuning
Press
to select
Auto Tuning
, select the
Scan Type
and proceed with
OK
.
5.4.2 Dish Setup
If you use
DVB -S/S2
as input source, the
Dish Setup
menu allow you to set you satellite and belonging
settings as DiSEqC port and LNB type. Afterwards you may start the
Auto Tuning
or
Manual Tuning
by
selecting with
EPG
button the wanted transponder.
5.4.3 DTV Manual Tuning (in DVB-T mode only)
Search and store programmes manually. Press
to select
DTV Manual Tuning
. Then press
OK
to enter
the sub-menu.
Press
to select a
Channel No.
, and then press
OK
to start the search. The search stops when a
programme is found and this programme will be stored in the current channel position. If you want to
stop the search, press
MENU
.
5.4.4 ATV Manual Tuning (in DVB-C mode only)
First select the source type of ATV. Then in the
Channel
menu, select
ATV Manual Tuning
and press
OK
to
access. Highlight and press
to select
Storage To 1
(maybe other number),
Sound System
and
Channel
No.
. Then select search and press
OK
to start the search. Press
for the unit to search towards higher
frequency. Press
for the unit to search towards lower frequency. The search stops when a programme
is found and this programme will be stored in the current channel position. If you want to stop the
search, press
MENU
.
Current CH
Set the channel number
Colour System
Select the colour system (Available: AUTO, PAL, SECAM)
Sound System
Select the Sound system
Fine-Tune
Adjust the frequency of the channel
Search
Start the channel search
5.4.5 Channel extra settings
Programme Edit
Edit the programmes. You can press the
COLOUR BUTTONS
on the remote
control to skip programmes, rename and delete programmes or move
programmes, and add programmes to the favourite list by pressing
FAV
.
Signal Information
Showing the information of current DTV channel. Only available with DTV
signal.
Cl information
Enables the use r to watch and change settings of CAM modules and check
values from inserted smart card.
Channel list
Select which channel list you like to see if you press on
LIST
button. Select
between
Main List
or
Favorite List
Schedule List
Press
in the
Channel
. Select
Schedule List
, then press
OK
to enter the sub-
menu. Use the
COLOUR BUTTONS
to modify your settings.
Software Updat e (USB)
Press
OK
and use
to select
Yes
if you want to update the software or
No
to go back to the main menu. For more information see also chapter
6.2.5
.
11
English
