Strong SRT 43UB6203, User Manual

Page: 13 / 22

„ „
Wireless, using the internal wireless and your home wireless network.
NOTE:
To access the Internet, you must subscribe to a highspeed broadband
Internet service with your Internet service provider.
NOTE:
Instructions below are just the usual ways to connect your TV to a wired or
wireless network. The connection method may differ depending on your
actual network configuration. If you have any questions about your home
network, please refer to your Internet service provider.
5.1 Connecting to a wired network
Fig. 6a
NOTE:
The graphics are for representation only.
To connect to a wired network
1. Ensure you have:
„ „
An Ethernet cable long enough to reach your TV
„ „
A router or modem with an available Ethernet port
„ „
A highspeed Internet connection
2. Connect your Ethernet cable to the router and to the Ethernet port on the back of the TV.
3. Use the
Network Configuration menu to configure the TV.
5.2 Connecting to a wireless network
Fig. 6b
NOTE:
The graphics are for representation only.
To connect to a wireless network:
1. Ensure you have:
„ „
A router broadcasting a highspeed wireless signal
„ „
A highspeed Internet connection
2. Use the Network Configuration menu to configure the TV.
6.0 HOME MENU
The Home menu contains Source, Smart and Apps . To access the menu, press the  on the remote
control. Use
t u
to move and
OK
to enter the option. To exit the menu, press  .
Source Select the input sources of the devices which are connected to the TV
through the different ports.
Smart Displays the Smart TV settings. Press
OK
to enter, then
t u
to select the
option.
9
English