background image

Problem

Possible cause and solution

No signal or weak signal, 
intermittent reception.

a)   Cables might have loosened; moisture might have entered into 

cables or connectors, heavy rain at present or heavy storm at 
present. 
Check the cable connections, LNB and other equipment 
connected between the LNB and the receiver, or peak the dish. 
Wait for rain/storm to subside. Ask a local satellite specialist for 
advice.

b)   The satellite dish is not pointing at the (correct) satellite(s). 

Adjust the dish. Ask a local satellite specialist for advice.

c)   Satellite dish is too small, trees or buildings in path. 

Change to a larger dish or change position of dish.

d)   Signal is too strong, dish is oversized. 

Connect a signal attenuator to the LNB input. Ask a local satellite 
specialist for advice.

Bad picture / blocking error 
during heavy rain.

Heavy rain will attenuate satellite signals, below a certain level 
blocking will occur. 
Make sure your dish installation is up to standards to minimize rain 
effects. When in doubt, ask a local satellite specialist for advice.

NOTE:

 

 If the problem persists after these solutions, please contact your local 
support centre or send a support mail via our website www.strong.tv.

8.0 SPECIFICATIONS

Audio

Audio Output: 

6 W + 6 W

Video

Channel coverage: 

DVB-T/T2:174 MHz-230 MHz; 470 MHz-860 MHz

 

DVB-C: 50-858 MHz

 

DVB-S/S2: 950 MHz-2150 MHz

System: 

DTV: DVB-T/T2, DVB-S/S2, DVB-C

 

ATV: PAL/SECAM (BG/DK/1)

 

AV: PAL, NTSC

Connectors 

1 x AIR/CABLE
1 x LNB
2 x HDMI
1 x TV SCART
1 x S/PDIF (coax.)
1 x headphones
1 x USB
1 x CI+ slot
1 x main power cable

16

Summary of Contents for SRT 32HY4003























Reviews: