1.5 Hanging the TV set on the wall
WARNING:
This operation requires two people.
To ensure a safe installation, observe the following safety notes:
Check that the wall can support the weight of the TV set and wall mount
assembly.
Follow the mounting instructions provided with the wall mount. For
certain models, make sure to screw the hexagonal VESA wall mounting
screw bosses (and screws) provided with the set into the nuts for the
wall mount at the back of your set before your wall mounting.
The TV set must be installed on a vertical wall.
Make sure to use only screws suitable for the material of the wall.
Make sure that the TV set cables are placed so that there is no danger of
tripping over them.
All other safety instructions about our TV sets are also applicable here.
1.6 Placing the TV on a table and other surfaces
Before setting up your television set, make sure that the surface you want to put the set on can
support its weight.
Do not place the set on an unstable surface (e.g. moving shelf, very edge of a unit) and make
sure that the front of the television set does not overhang the surface it is standing on.
To avoid TV from falling please fasten TV to the wall by using necessary screws (in VESA wall
mount holes), clamps, anchors to be bought separately. Install TV near to the wall to avoid
falling backwards.
1.7 Multi product user manual
The features described in this manual are common to most models. Some features may not be
available on your TV and/or your TV may include features that are not described in this user manual.
The illustrations in this manual may differ from the actual product. Please refer to the actual product.
1.8 Information for Users on Disposal of Old Equipment
and Batteries
Products
Battery
NOTICE:
The sign Pb below the symbol for batteries indicates that this battery
contains lead.
European Union
These symbols indicate that the electrical and electronic equipment and the battery with this symbol
should not be disposed of as general household waste at their end-of-life. Instead, the products
4
PART 1