NOTES:
These functions may not be available depending on the connected
equipment.
If there is no more battery life left in the connected device, charging will
not start.
To operate the mobile phone with the TV remote, you need to turn on
the
T-Link
function first, then press
Option
and select
Quick access >
T-Link > Setup > Guide Menu
. Follow the virtual keypad to do operations.
5.23.1 Connecting MHL-compatible Device
Connect the MHL-compatible device to the HDMI port identified with MHL on the TV using an MHL
cable (not supplied), charging will start automatically.
When connecting an MHL-compatible device to the HDMI port identified with MHL on the TV, switch
the TV source to HDMI 2 or HDMI.
NOTE:
Do not connect the MHL-compatible device to any ports other than HDMI
port identified with MHL.
5.23.2 When using MHL
Interoperability with MHL devices from other manufacturers is not guaranteed.
STRONG does not provide any guarantee, therefore, against operational failure such as that described
below when an MHL source is connected to the TV.
No picture or sound
Some of the functions do not work by remote operation from the TV
If MHL does not work properly, also contact the manufacturer of the source device for advice on its
use.
Do not disconnect the power plug of the TV when the TV is active and the MHL device is connected.
Do not disconnect the power plug of the TV when the TV is in standby mode and the MHL device is
connected.
6.0 OTHER INFORMATION
6.1 Password in Parental Control
The default password is
1234
. You can change it to a new one.
The super password is
0423
. If you forget your code, enter the super password to override any
existing codes.
7.0 TROUBLESHOOTING
Please check the following list before requesting service.
There is no picture or sound.
Make sure the power cord is properly inserted in the power outlet.
Make sure the source type is set correctly.
19
PART 1
English
