Crypted
Select
FTA Channels
to search Free-To-Air channels only or
All Channels
to
search FTA and Encrypted channels
Service Type
Select
DTV
to search DTV channels only,
RADIO
to search radio channels only
or
All
for a complete search.
It is recommended to use the default settings.
3.2 DVB-T/T2 installation
Terrestrial Setting
First select the Tune Type by pressing
t
u
to select
DTV, ATV
or
DTV+ATV
(DTV to search digital
broadcasts and ATV to search analogue broadcasts). Press
q
to continue. Press
t
u
to select
All
Channels
or
FTA Channels
. Press
pq
t
u
to highlight the country that you want to install, then press
OK
to start searching.
3.3 DVB-C installation
Cable Setting
Press
pq
t
u
to highlight your settings.
Scan type
You can select
Network Scan
or
Full
. (Default
Network Scan
for quick search
advised)
NOTE:
Full
scan will have a duration of approximately 20 minutes, depending on
your cable network.
Frequency
Please enter (with
0 ~ 9
) the main frequency used by your provider in KHz.
Network ID
Please enter (with
0 ~ 9
) the used
Network ID
from your provider.
Symbol
Please enter (with
0 ~ 9
) the used
Symbol
from your provider. (Ks/s)
NOTE:
Please check the settings for your cable system used by your provider!
Press
OK
to continue.
Crypted
Select
FTA Channels
to search Free-To-Air channels only or
All Channels
to
search FTA and encrypted channels
Press
pq
t
u
to highlight the country that you want to install, then press
OK
to start searching.
4.0 ELECTRONIC PROGRAMME GUIDE (EPG)
EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and offers
information on broadcasted programmes. You can access it in digital mode by pressing
EPG
on the
remote control. Press
EPG
to bring up the EPG interface. Use
pq
to select a programme. Press
EXIT
to
stop and return to viewing modes.
Then press the
COLOUR BUTTONS
for entering the required settings.
GREEN
Access extra info of programme
YELLOW
Open the reminder setting over view
BLUE
Set reminder of selected programme.
9
English
