15
PART 1 • English
En
gl
is
h
Use
pq
to select
"Load Factory Setting"
in the
Tools
menu and press ok. You are asked to
input password.
Input the correct password using the 0~9 buttons (default: 0000). A confirmation window
is displayed.
Select
Yes
to return to factory settings. Select
No
to cancel.
Press EXIT to leave.
7.4.3 s/W Upgrade by oTA
This receiver is equipped with an Over The Air software upgrade option. An Over The Air update
might not be available in your region. Please visit our website www.strong.tv or contact your local
service hotline for more information about this option.
7.4.4 Upgrade by Usb
This feature allows you to upgrade receiver software via the USB port. When new software is available
for your receiver, it can be downloaded from our website www.strong.tv.
Place the software file (unzipped) in the root directory of your USB storage device (HDD, memory
stick etc.) and insert this device into the USB port of the receiver.
Select
Upgrade by USB
from the
Tools
menu and press ok to proceed.
The upgrade menu will now be displayed.
Use
pq
to select
Upgrade Mode
and choose option
Allcode
.
Use
pq
to select
Upgrade File
and choose the file containing the new software.
Once all settings are made, move the highlight to
Start
and press ok to start the upgrade process.
After a few seconds, the receiver asks: “Are you sure to burn flash?”. Select
Yes
to finalize the upgrade
or
No
to quit without upgrading.
noTE If, after a software upgrade, the receiver should behave in an unexpected way, please perform a
factory reset as well. See chapter 7.4.2.
WARnInG!
After an update the receiver restarts automatically. During the upgrade
process NEVER disconnect the receiver from the mains or switch off the
power! Doing so might damage your receiver and will void warranty! Remove
USB device safely
Select
Remove USB device safely
from the tools menu and press ok. The
receiver will display a message indicating that you can safely remove your
storage device from the receiver.
noTE:
After performing this function, the USB device is no longer accessible from
your receiver. To gain access to your storage device again, re insert it or switch
the receiver to standby and on again.
7.5 Games
Your receiver is equipped with two games which can be played on your TV screen using the receiver
remote control.
Use
pq
to select
Game
from the Main menu and press ok or
u
to proceed.
Select one of the available games (
Othello
or
Sudoku
) using
pq
and press ok to start the game.
Follow the directions on screen.
Summary of Contents for PRIMA V
Page 1: ...User manual Digital Terrestrial MPEG 4 HD Receiver PRIMA V Picture similar ...
Page 2: ......
Page 3: ......
Page 23: ...20 PART 1 English ...
