SRT D85W
- Instructions
www.strong-technologies.com
3
2. Reflector Mounting
Screw the two
M8*25 round-head
screws
into the
Pole Adapter
using
two
M8 flange nuts.
Place the
Pole Adapter
into the
Tilting
Az/El Bracket
.
Screw the two
M8*16 Round flat head
Square screws
using two
M8 flange
nuts
,
Screw the
M8*65 hex-head cap screw
w/w/sw
using a
M8 flange nut
.
Place the
Pole Adapter
&
Tilting Az/El
Bracket
on the
Reflector Bracket
,
Screw the three
M8*16 Round flat
head Square screws
using three
M8
flange nuts
.
Place the
Cap washer
into the
LNBF
Arm
,
Place the four
M6*30 Round flat head
Square screws
into the
LNBF Arm
.
Use the four
M6 stop washers
to fix
the screws.
Place and screw the
Reflector Bracket
into the screws of the
LNBF Arm
using
four
M6 flange nuts.
