16
Warning:
Improperly sealed wires can allow water to enter the cabinet causing the possibility of
electrical shock.
Danger
: This machine should never be operated or sprayed with water without sealing the
electrical disconnect box. The metal key supplied with the machine should always be used to
lock and seal the machine’s electrical disconnect box before clean up begins. Rotating the lock
counter clock-wise, by use of this key will seal the box and prevent water from contacting
electrical components inside the box.
DO NOT TURN THE MIXER OR PUMP ON YET
C.
Connecting Water
Note:
The following procedures should be adhered to before attempting to start the mixer or
pump.
1.
In order to flush air and debris from the incoming water line, turn the water on before
connecting it to the Fillermate water system.
2.
Turn the water line off.
3.
Connect the water line to the fitting on the bottom of the water system.
4.
Open the wash-down faucet and water inlet valve to allow excess air to escape.
5.
Turn incoming water back on until water flows through the two ports.
6.
Open mixer door an allow water to flow into wet material hopper.
7.
Open hopper trap door so that this water and any excess debris can be emptied.
8.
Close the hopper trap door and place 10 more gallons of water in the hopper.