Operating and maintenance
instructions
AG-250/330 water softeners
Sivu 9/22
StrongFlow Oy
Tel. +358 20 730 1820
Domicile: Kaarina
Ahokylänkatu 3
www.strongflow.fi
Business ID: 2024125-8
FI-20780 Kaarina
VAT no: FI25511181
4. PROGRAMMING CONTROLLER
4.1 Initial power-up/ Re-initialization (reset)
When filter is installed to water supply the start-up can begin. However, do not open the inlet water
valve yet.
1) Connect AC adapter to power source (picture 7). Make sure that the electr
ic cord doesn’t tangle
around the camshaft.
Picture 7. Controller identification
2) Select right valve type from table 2.
•
Select your valve type using UP and DOWN buttons. Accept selected valve type with SET
button.
3) Select system size (resin volume in tank) from table 2.
•
Select the nearest volume to your actual system size by using UP and DOWN buttons.
Accepted selected resin volume with SET button.
