28
Strong Enterprises Owner’s Manual. Para-Cushion model 306 Squadron Seat
11236 Satellite Blvd. Orlando, FL 32837 Tel: (407) 859-9317 Fax: (407) 850-6978
www.strongparachutes.com [email protected]
Rigger tip: Once you have cut the first
hole in the Spandura® for your loop
to come through, fold the cap perfectly
in half at that hole, making a crease.
Unfold the cap, you can see where 180º
is and where to place the opposite hole.
8.4
Once the holes are cut, install the new
cap over the loop by aligning the loop
ends with the holes in the Spandura®
cap. Pull the loop through the holes
with your hand tack needle.
8.5
Hand tack new cap in place at 90º angles
to the loops. Do this by going through
pilot chute top and through Spandura®
as close to binding tape as possible. Tie
off with surgeon’s knot.
Note!
Be careful not to catch the
pilot chute canopy cloth
below the stitch line at the
top of the pilot chute. Doing
so may result in stress being
put on the cloth resulting in
a hole in the canopy.
Summary of Contents for Para-Cushion 306 Squadron Seat
Page 35: ......
