27
Strong Enterprises Owner’s Manual. Para-Cushion
www.strongparachutes.com [email protected]
Rigger Tip: Once you have cut
the first hole in the Spandura® for
your loop to come through, fold the
cap perfectly in half at that hole,
making a crease. Unfold the cap,
and you can see just where 180º is
and where your other hole should
go.
8.4
Once the holes are cut, install the
new cap over the loop by aligning
the loop ends with the holes in the
Spandura ®cap and pulling the loop
through the holes with your hand
tack needle.
Hand tack the new cap in place at
90º angle to the loop.
Note!
Be careful not to catch
the pilot chute canopy
cloth below the stitch
line at the top of the
pilot chute. Doing so
may result in stress
being put on the cloth
resulting in a hole in
the canopy.
