5
MA_VEB100-1-2-2W-4-5_A3-1_190627_en.doc
1
General notes on safety
Manuals and additional information can be found on the STROBEL website at:
http://www.strobel.biz
Every person in charge of setting up, operating, servicing and repairing the machine
must first read and understand the operating instructions and particularly the safety
instructions before starting up the machine.
Failure to comply with the following safety instructions can lead to bodily injury or
damage to the machine.
1.
The machine must only be operated by persons familiar with the relevant
operating instructions and who have been instructed accordingly.
2.
Before commissioning also read the notes on safety and the operating
instructions of the sewing drive manufacturer.
3.
Only use the machine in the intended manner and never without the provided
guards. Always observe the pertinent safety regulations.
4.
Switch off the main switch or pull the power plug for threading, changing the
reels, exchanging sewing tools such as needle, looper, stitch plate, transport
devices, possibly cutter and cutting block, for cleaning and when leaving the
workplace as well as for maintenance.
5.
General maintenance tasks may be carried out only by properly trained persons
in accordance with the operating instructions.
6.
Repair work, retrofitting and maintenance may be carried out only by technicians
or specially trained personnel.
7.
When servicing or repairing pneumatic equipment, the machine must be
disconnected from the pneumatic supply. Exceptions are only allowed for
adjustment work and tests of functionality performed by specially trained
technicians.
8.
Only specially qualified technicians may work on the electrical equipment.
9.
It is forbidden to work on electrically live components! Exemptions are covered
by the EN50110 (DIN VDE0105) regulations.
10.
Any retrofitting or alterations to the machine may only be performed under strict
compliance with all pertinent safety regulations.
11.
Only use our approved spare parts when servicing and/or repairing the machine.
12.
It is forbidden to operate the sewing head until it is determined that the entire
sewing unit complies with EU provisions.
Summary of Contents for VEB100-1
Page 4: ......
Page 8: ...4 MA_VEB100 1 2 2W 4 5_A3 1_190627_en doc...
Page 33: ...29 MA_VEB100 1 2 2W 4 5_A3 1_190627_en doc Fig 8...
Page 62: ......
