significantly, result in serious injury or death of the user. To ensure safe operation of the
instrument, it is therefore imperative that you follow these instructions carefully.
Power cable
To avoid possible short circuit, shock, or fire.
Only use the power cable provided with the Cell Strain Instrument.
Do not touch the cable with wet hands.
Do not use the machine with other voltage than that specified. In some cases, a
transformer may be used for compatibility. Inappropriate current may result in the
machine overheating, short-circuiting, and/or fire may occur.
Do not staple around the power cable.
Do not bend the cable or place heavy objects on it.
When pulling a connector from an outlet, pull to disconnect gently by holding its plug, not
the cable.
Do not plug many objects into a single electrical outlet since it may cause fire.
If you are using an extension cord, ensure it can withstand the total current to be used.
Disconnect power from the unit when it is not in use.
Connect the instrument to a power-surge protected outlet.
Installation Location and Environment
Keep the instrument on a stable, level floor or a table, secure from vibrations. Be sure
you have enough space.
Do not store the instrument in a humid or dusty place. Over time, excessive humidity or
dust may cause deterioration that can result in an electrical short-circuit and possibly fire.
Do not use the machine in a place where the temperature is excessively high. Do not
place and run the machine near a heater or in a place being exposed to direct sunlight.
To avoid possibly explosion, never place and run the instrument nearby the presence of
flammable solid substance, liquid, or gas. It may cause explosion or fire.
Use the machine in well-lit conditions.
Do not use the machine outdoors in direct sunlight or rain, which may cause overheating
or short circuit.
Operational Concerns
Please make sure to read the manual prior to running the unit. Those who are not familiar
with the machine should not operate it.
Do not put your hand close to mechanical parts or alike while the unit is running.
Do not put any foreign substances inside the machine. Water, metal, or paper in motor
area, may cause fire or electrical shock.
Do not make any attempt to disassemble or modify the machine. Do not remove the
cover in an attempt to touch the mechanism inside, which may cause you an electrical
